General Manager, lobbyist, and engineer are just a few of the titles CMR’s Carla Allen holds. On our spring excursion she did a little of each.
We as railfans tend to get caught up with railroad equipment, history, rivets, and other non-human aspects of railroading. The honest truth is trains move because of the people behind them. The excursion I rode on the Central Montana is no different. Without Carla, Kristi, AJ, Alan, and many others we wouldn’t have turned a wheel.
Running around in a couple of 1950’s era GP9’s means problems can happen. Sure enough when we stopped at Danvers to get the power around to the other end of the train both locomotives wouldn’t load. With a single ended siding we needed both units move the train around. Initially Carla and Kristi worked on the issue but soon AJ and Alan were involved. After 30 minutes of trying different things AJ and Alan popped open a cabinet and started hunting around for the issue. Soon they discovered a balky relay which stuck in the wrong position and prevented loading. A quick tap of a flag stick put it back in the right spot and we were in business again. Without the right people it would have been a long walk back to Denton!
Our troubleshooters AJ (left) and Alan (right) work to determine which balky relay they need to give a nudge.
With only an engineer and conductor the switching moves at Danvers would have been a challenge. Thankfully we had a couple of additional railroaders on the excursion and they pitched in to facilitate the work. After a quick job briefing Alan and AJ teamed up with Kristi and Carla to move the power to the other end of the train. Without their willingness to volunteer the run around move sure would have taken longer.
AJ Shewan make a joint between our caboose and a flat car.
As you can see people make it happen, even when it is a simple excursion train…